'DELL Server Memory Fault Error' Troubleshooting

By WireINPUT -
Today we have received an alert on Memory Fault on one of the DELL server model POWEREDGE 6450. We did check in the event viewer whether any errors that are throwing for the information. Howerver not seen any alerts in that list.

Then next would be checking the Dell OpenManager

Start ==> Programs ==> Dell OpenManage Applications ==> Server Administrator ==> Server Administrator

Note: This one I took from Version 1.0, if your server has upgraded version options would be little different.

You get login screen, login with your local admin credentials or use the domain account

There you can see a list of options your left hand side bar, click on 'Memory'

Once you click on 'Memory', right side page you will find the status of memory blocks that are connected in.
Here goes the example -




In this page you can see what is the maximum RAM it supports, how much currently installed etc as well.

Apart from Memory option, you can find more options as like below -

BIOS, Currents, Fans, Firmware, Intrusion, Network, Ports, Power Supplies, Processors, Temperatures, Slots, Voltages, Software, Storage

Comments

Post a Comment

Popular posts from this blog

VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger

By WireINPUT -
Image
How to deal with PSOD - VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger - Easy troubleshooting steps and how to identify or determine exact root cause of the PSOD issue Host is down with PSOD with the above said error. Verified BIOS settings, worked with on site engineer, contacted the IBM server support (since this is IBM server, have contacted IBM, if it is IBM or some other hardware, you may need to reach out the respective vendor) Sometimes it could be server hardware issue like DIMMs, CPU, Processor related or may be a chance of network related. Please have a through check on the above said and come to a conclusion what could the issue. Based on that, need to troubleshoot the issue.
Read more

The Windows Time Service terminated with the following error - Event ID 7023 & 46

By nag -
After you upgrade a Microsoft Windows Server 2003-based domain controller to Windows Server 2003 Service Pack 1 (SP1), the Windows Time service may not start. In this scenario, the following events may be logged in the Windows System log. Message 1 Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Description: The Windows Time service terminated with the following error: Not all privileges referenced are assigned to the caller. For more information, see Help and Support Center at http://support.microsoft.com. Message 2 Event Type: Error Event Source: W32Time Event Category: None Event ID: 46 Description: The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started. Additionally, when you try to start the Windows Time service manually, you may receive one of the following error messages: Error 1083: The executable program that this servic
Read more

IBM x3650 M4 Series Server Model - Activation Keys Backup to be taken for IMM Moduel II, why?

By WireINPUT -
Image
If you are planning to replace the system board (Mother Board) for M4 series of IBM xSeries 3650 model server, you should and must take the activation keys backup, otherwise you will miss the IMM key. IMM key something like iLO Activation key on HP servers. If that  iLO key didn't acivated, then you won't get the 'Remote Access' option. In the same way, IBM series requires a key to be activated to access the IMM console. IMM Activation to be backuped and restore once the new board get replaced. Here is the screenshot there you see more options what we discussed so far -
Read more