Compaq Presario 2560EA Windows7 Driver

By WireINPUT -
This is my suggestion for windows 7 driver  Compaq Presario 2560EAbase on it hardware. So if you have any problems leave your comments.

AUDIO:
Conextant AC97 Audio Driver
File name:  sp23455_win7.rar
Download
(to install right click and select 'run as admin')

GRAPHIC:
ATI RS200M Video Driver for Windows 7
RADEON IGP 340M/RADEON IGP 345M 
There are no official drivers release by ATI and HP, but normally installing manually will do

WIRELESS:
Broadcom BCM43XX Wireless Driver
Download (direct)
Download

Installation:
Normally i make instructions with picture, but for wireless no because i need you to install the graphic first, after that you will understand the instruction below.
 
Important! if your wireless already worked no need to install this driver.
 
1.Extract the SP28537 with WINRAR or double click on it.
 
2. If you extract it you will get SP28537 folder, if you run by double click it, it will resulting in error but you will get a SP28537 folder in C:\swsetup\SP28537.
 
3. Open device manager by click start and type DEVMGMT.MSC and press enter
 
4. look under Network adapters you will see network will yellow mark on it (the name varies like 8.021b etc.. with yellow mark)
 
5. right click and select update driver.
 
6. . Select browse my computer for driver software




7. Select Browse and tick in the box " Include subfolders"

9. The browse to driver folder we extracted earlier C:\swsetup\SP28537.
10. continue with on screen instruction.


ETHERNET/LAN:
National Semiconductor DP83815/816 10/100 MacPhyter NDIS 5.0 Miniport Driver for Windows 7
Download (direct)
Download (mediafire)

Installation:
The installation for LAN is similar to Wireless
1.Extract the SP28537 with WINRAR or double click on it.
2. If you extract it you will get SP25618 folder, if you run by double click it, it will resulting in error but you will get a SP28537 folder in C:\swsetup\SP25618.
3. Open device manager by click start and type DEVMGMT.MSC and press enter
4. look under Network adapters you will see network will yellow mark on it (the name varies like 8.021b etc.. with yellow mark)
5. right click and select update driver.
6. . Select browse my computer for driver software
7. Select Browse and tick in the box " Include subfolders"
9. The browse to driver folder we extracted earlier C:\swsetup\SP25618.
10. continue with on screen instruction.

INFRARED/FIR You may be need the infrared driver , look at the device manager and you will see UNKNOWN , BASE SYSTEM DEVICE or ay name with YELLOW MARK. SO this may refer to Infrared.

To install it similar to ETHERNET and WIRELESS.
ALi Fast Infrared Controller Driver ALI5123
Download

Comments

Post a Comment

Popular posts from this blog

VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger

By WireINPUT -
Image
How to deal with PSOD - VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger - Easy troubleshooting steps and how to identify or determine exact root cause of the PSOD issue Host is down with PSOD with the above said error. Verified BIOS settings, worked with on site engineer, contacted the IBM server support (since this is IBM server, have contacted IBM, if it is IBM or some other hardware, you may need to reach out the respective vendor) Sometimes it could be server hardware issue like DIMMs, CPU, Processor related or may be a chance of network related. Please have a through check on the above said and come to a conclusion what could the issue. Based on that, need to troubleshoot the issue.
Read more

The Windows Time Service terminated with the following error - Event ID 7023 & 46

By nag -
After you upgrade a Microsoft Windows Server 2003-based domain controller to Windows Server 2003 Service Pack 1 (SP1), the Windows Time service may not start. In this scenario, the following events may be logged in the Windows System log. Message 1 Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Description: The Windows Time service terminated with the following error: Not all privileges referenced are assigned to the caller. For more information, see Help and Support Center at http://support.microsoft.com. Message 2 Event Type: Error Event Source: W32Time Event Category: None Event ID: 46 Description: The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started. Additionally, when you try to start the Windows Time service manually, you may receive one of the following error messages: Error 1083: The executable program that this servic
Read more

IBM x3650 M4 Series Server Model - Activation Keys Backup to be taken for IMM Moduel II, why?

By WireINPUT -
Image
If you are planning to replace the system board (Mother Board) for M4 series of IBM xSeries 3650 model server, you should and must take the activation keys backup, otherwise you will miss the IMM key. IMM key something like iLO Activation key on HP servers. If that  iLO key didn't acivated, then you won't get the 'Remote Access' option. In the same way, IBM series requires a key to be activated to access the IMM console. IMM Activation to be backuped and restore once the new board get replaced. Here is the screenshot there you see more options what we discussed so far -
Read more