Event ID 29, Event ID 47 & Event ID 38

By nag -
Error Message:

Time Provider NtpClient: No valid response has been received from domain controller after 8 attempts to contact it. This domain controller will be discarded as a time source and NtpClient will attempt to discover a new domain controller from which to synchronize.


Event 38
The time provider NtpClient cannot reach or is currently receiving invalid time data from (ntp.dIP address -> IP address).


Event 29
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 30 minutes. NtpClient has no source of accurate time.


Event 47
Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x1 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name.



Resolution:

Go to Command Prompt: Start --> Run --> CMD --> Press Enter

C:\net time /setsntp:your_DC_name_here or IP_address.


--> Restart Windows Time service


Example: net time /setsntp:win2k3adc1.abc.com



.

Comments

Post a Comment

Popular posts from this blog

VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger

By WireINPUT -
Image
How to deal with PSOD - VMware PSOD Purple Screen of Death - Debugger waiting (world 2078) -- no port for remote debugger. "Escape" for local debugger - Easy troubleshooting steps and how to identify or determine exact root cause of the PSOD issue Host is down with PSOD with the above said error. Verified BIOS settings, worked with on site engineer, contacted the IBM server support (since this is IBM server, have contacted IBM, if it is IBM or some other hardware, you may need to reach out the respective vendor) Sometimes it could be server hardware issue like DIMMs, CPU, Processor related or may be a chance of network related. Please have a through check on the above said and come to a conclusion what could the issue. Based on that, need to troubleshoot the issue.
Read more

The Windows Time Service terminated with the following error - Event ID 7023 & 46

By nag -
After you upgrade a Microsoft Windows Server 2003-based domain controller to Windows Server 2003 Service Pack 1 (SP1), the Windows Time service may not start. In this scenario, the following events may be logged in the Windows System log. Message 1 Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Description: The Windows Time service terminated with the following error: Not all privileges referenced are assigned to the caller. For more information, see Help and Support Center at http://support.microsoft.com. Message 2 Event Type: Error Event Source: W32Time Event Category: None Event ID: 46 Description: The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started. Additionally, when you try to start the Windows Time service manually, you may receive one of the following error messages: Error 1083: The executable program that this servic
Read more

IBM x3650 M4 Series Server Model - Activation Keys Backup to be taken for IMM Moduel II, why?

By WireINPUT -
Image
If you are planning to replace the system board (Mother Board) for M4 series of IBM xSeries 3650 model server, you should and must take the activation keys backup, otherwise you will miss the IMM key. IMM key something like iLO Activation key on HP servers. If that  iLO key didn't acivated, then you won't get the 'Remote Access' option. In the same way, IBM series requires a key to be activated to access the IMM console. IMM Activation to be backuped and restore once the new board get replaced. Here is the screenshot there you see more options what we discussed so far -
Read more